News
Contact Us
WEIFANG SHENGCHUAN MACHINERY CO.,LTD
Sales Director: Mr.Kevin Meng
Mob: +86 15692369696
Add: No.5999,Qingyuan street, Weifang, Shandong, China
Home > News > Content

Power Weeder Technical Points

Weifang Shengchuan Machinery Co.,Ltd | Updated: Sep 21, 2017

power weeder Technical points

The weeding characteristics of the power weeder

In our usual home garden finishing, the most commonly used garden tool is nothing more than the chain saw, high oil chain saw, there is power shrimp. And usually the most common power weeder is the backpack power source weeder. This power source weed a lot of features, mainly the following:

High efficiency: the general use of this power weeder, its effect is equivalent to 16 times the artificial weeding, to quickly complete the operation;

Benefit: If it is for the orchard weeding, because of its fast rotation, cutting effect is very good, especially for the tenderness of the weed cutting the best results. Generally one year in addition to three grass can be;

To maintain soil and water: artificial hoe weeding, due to weeding at the same time loosening the topsoil, it will often cause a certain soil erosion, artificial hull in the ladder, resulting in soil erosion will be more serious. And if the use of power weeder mowing, because only part of the exclusion of the ground, the soil has little effect, coupled with grass-roots solid soil effect, to maintain soil and water is extremely favorable;

Can increase the fertility: the use of power weed weeding, in general, in addition to the grass can cover the whole orchard, can be used as orchard organic fertilizer, increase soil fertility.

The technical point of using this power shredder is: Weeds are generally 10-13 cm for the best weeding time. If the weeds are too high, the best step in two steps, first cut the upper part, and then cut the lower part. Use the power of the weeder, should both hands to help, and to the side of the fruit tree to maintain a certain degree of inclination, so that cut off the weeds as far as possible on the edge of the fruit trees, can be used as organic fertilizer. Power plant weed the risk is relatively large, if used improperly, easily lead to personal injury or machine damage. Remind farmers to pay attention to the following questions when using power weeders and follow the order below.

First, familiar with the instructions

Before use, familiar with the instruction manual, keep in mind the safety precautions in the manual, master the installation, adjustment, operation, maintenance methods, understand the scope and supporting power, spindle speed and other technical parameters.

Second, the installation and adjustment requirements

1, chaff machine should be placed or fixed on a solid, flat foundation. The workplace should be spacious and equipped with fire prevention measures.

2, in strict accordance with the instructions specified in the matching power and speed matching motor. The power line should be made with copper conductor of not less than 6 square millimeters. The current value of the electrical switch, socket, plug and other electrical load should not be lower than the rated current of the motor (specified in accordance with the motor manual). The power switch should be installed in the operator's range of activities, the general distance of the operator should not exceed 3 meters, and there should be no other obstacles.


Contact Us
Weifang Shengchuan Machinery Co.,Ltd
Tel: 0086 0536-7599808
Address: No.5999 Qingyuan Street,ETDZ, Weifang, Shandong, China
Newsletter
Copyright © Weifang Shengchuan Machinery Co.,Ltd All rights reserved.
  • 0086-15692369696